Installing Inventor10

Hello,
I have a problem installing Autodesk Inventor 10 on my
WK SP4 OS system on XP SP2 system it works fine.
Event log during setup Inventor 10 Pro.
Source Loadperf
Category (none)
Event ID 2000
No object list was found in the installation file.
Adding an object list to the installation file will improve
performance of the system when measuring performance counters.
Source Loadperf
Category (none)
Event ID 1000
Performance counters for the MSSQL$INVENTORCONTENT service were loaded
successfully.
The Record Data contains the new index values assigned to this service.
Source MSSQL$INVENTORCONTENT
Category (8)
Event ID 19011
The description for Event ID ( 19011 ) in Source ( MSSQL$INVENTORCONTENT
) cannot be found.
The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer.
The following information is part of the event: (SpnRegister) : Error 1355.
Source MsiInstaller
Category (none)
Event ID 1013
Product: Microsoft SQL Server Desktop Engine --
An error has occurred registering this installation of SQL Server
Desktop Engine with MDAC.
Source MsiInstaller
Category (none)
Event ID 11708
Product: Microsoft SQL Server Desktop Engine --
Installation operation failed.
Source MsiInstaller
Category (none)
Event ID 11722
Product: Autodesk Inventor Professional 10 -- Error 1722.
There is a problem with this Windows Installer package.
A program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor.
Action InstallMSDE, location:
F:\inv1_pro10\bin\acadfeui\support\msde\setup.exe, command:
SAPWD="AutodeskVault" INSTANCENAME="INVENTORCONTENT" SECURITYMODE=SQL
DISABLENETWORKPROTOCOLS=1 /L*v
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\MSDE_CC_setup.l og /qb
REBOOT=ReallySuppress
Kind Regards
hi,
Smeusje wrote:
> Hello,
> I have a problem installing Autodesk Inventor 10 on my
> WK SP4 OS system on XP SP2 system it works fine.
> Event log during setup Inventor 10 Pro.
try inspecting C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\MSDE_CC_setup.l og
for
RETURN VALUE 3
entries..
about 10 lines before each entry some (sometime cryptic) description of the
problem will be reported..
Andrea Montanari (Microsoft MVP - SQL Server)
http://www.asql.biz/DbaMgr.shtmhttp://italy.mvps.org
DbaMgr2k ver 0.18.0 - DbaMgr ver 0.62.0
(my vb6+sql-dmo little try to provide MS MSDE 1.0 and MSDE 2000 a visual
interface)
-- remove DMO to reply
|||I have two of them
************************************************** ************************************************** ********************
Starting custom action SkuIt
MSI (s) (30:D4) [13:57:35:890]: Executing op:
CustomActionSchedule(Action=ConfigServer.2D02443E_ 7002_4C0B_ABC9_EAB2C064397B...
MSI (s) (30:18) [13:57:35:921]: Invoking remote custom action. DLL:
C:\WINNT\Installer\MSI47.tmp, Entrypoint: ConfigServer
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
TempFolder is
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\
Loading extended custom action library
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlcax.dll
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
Starting custom action ConfigServer
MSI (s) (30:D4) [13:58:06:968]: Executing op:
ActionStart(Name=RegSQLWithMDAC.2D02443E_7002_4C0B _ABC9_EAB2C064397B,,)
Executing "C:\Program Files\Microsoft SQL
Server\80\Tools\Binn\cnfgsvr.exe -V 1 -M 1 -U sa -I "INVENTORCONTENT" -Q
"SQL_Latin1_General_CP1_CI_AS""
MSI (s) (30:D4) [13:58:06:968]: Executing op:
CustomActionSchedule(Action=RegSQLWithMDAC.2D02443 E_7002_4C0B_ABC9_EAB2C064397B,ActionType=1025,Sour ce=BinaryData,Target=RegSQLWithMDAC,)
MSI (s) (30:18) [13:58:06:984]: Invoking remote custom action. DLL:
C:\WINNT\Installer\MSI48.tmp, Entrypoint: RegSQLWithMDAC
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
TempFolder is
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\
Loading extended custom action library
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlcax.dll
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
Starting custom action RegSqlWithMdac
MSI (s) (30!00) [13:58:12:796]: Product: Microsoft SQL Server Desktop
Engine -- An error has occurred registering this installation of SQL
Server Desktop Engine with MDAC.
MSI (c) (60:90) [13:58:07:109]: Font created. Charset: Req=0, Ret=0,
Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
An error has occurred registering this installation of SQL Server
Desktop Engine with MDAC.
MSI (s) (30:D4) [13:58:12:812]: User policy value 'DisableRollback' is 0
MSI (s) (30:D4) [13:58:12:812]: Machine policy value 'DisableRollback' is 0
Action ended 13:58:12: InstallFinalize. Return value 3.
************************************************** ************************************************** *******************
MSI (s) (30:D4) [13:58:19:078]: Executing op:
ActionStart(Name=RollbackStreamSupportFiles.2D0244 3E_7002_4C0B_ABC9_EAB2C064397B,,)
MSI (s) (30:D4) [13:58:19:078]: Executing op:
CustomActionRollback(Action=RollbackStreamSupportF iles.2D02443E_7002_4C0B_ABC9_EAB2C064397B,ActionTy pe=1281,Source=BinaryData,Target=RemoveSupportFile s,)
MSI (s) (30:94) [13:58:19:078]: Invoking remote custom action. DLL:
C:\WINNT\Installer\MSI4B.tmp, Entrypoint: RemoveSupportFiles
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\setupex.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqdedev.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlsut.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlunirl.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlresld.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlcax.rll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlstp.dll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlstp.rll
Deleted Support file :
C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\{E09B48B5-E141-427A-AB0C-D3605127224A}\sqlcax.dll
MSI (s) (30:D4) [13:58:19:203]: Executing op:
ActionStart(Name=RollbackDeferProperties.2D02443E_ 7002_4C0B_ABC9_EAB2C064397B,,)
MSI (s) (30:D4) [13:58:19:203]: Executing op:
CustomActionRollback(Action=RollbackDeferPropertie s.2D02443E_7002_4C0B_ABC9_EAB2C064397B,ActionType= 1281,Source=BinaryData,Target=DeferProperties,)
MSI (s) (30:94) [13:58:19:203]: Invoking remote custom action. DLL:
C:\WINNT\Installer\MSI4C.tmp, Entrypoint: DeferProperties
SOFTWARE\Microsoft\Microsoft SQL Server
Setup.{E09B48B5-E141-427A-AB0C-D3605127224A}
Start custom action DeferProperties
MSI (s) (30:D4) [13:58:19:421]: Executing op:
End(Checksum=0,ProgressTotalHDWord=0,ProgressTotal LDWord=0)
MSI (s) (30:D4) [13:58:19:421]: Error in rollback skipped. Return: 5
Defer Properties returns: 0
MSI (s) (30:D4) [13:58:19:437]: Unlocking Server
MSI (s) (30:D4) [13:58:19:437]: PROPERTY CHANGE: Deleting UpdateStarted
property. Its current value is '1'.
Action ended 13:58:19: INSTALL. Return value 3.
************************************************** ************************************************** **********************
I already changed from "Not difined" to "silently succeed" as
mentionned in the MSDE 2000 Release A guide
Unsigned driver installation behavior.
Unsigned non-driver installation behavior
Extract guide
A MSDE 2000 Release A installation will fail if either of the following
security policies has been set to Do not allow installation:
* The Devices: Unsigned driver installation behavior local security
policy for Windows XP.
* The Unsigned non-driver installation behavior local security
policy for Windows 2000.
If you use the Do not allow installation setting, you must change it to
Silently succeed before installing MSDE 2000 Release A. If necessary,
you can return the policy to its previous setting after the installation
is complete.
Note Do not allow installation is not the default setting for these
security policies.
To set these policies:
1. In Control Panel, double-click Administrative Tools.
2. Double-click Local Security Policy.
3. Expand Local Policies.
4. Select Security Options.
5. Ensure that the following option in the right pane is set to
Silently Succeed before installing MSDE 2000 Release A:
* On Windows XP and Windows 2003: Devices: Unsigned driver
installation behavior.
* On Windows 2000: Unsigned non-driver installation behavior.
Still doesn't work
Kind regards
Andrea Montanari wrote:

>hi,
>Smeusje wrote:
>
>try inspecting C:\DOCUME~1\FRANCK~1\LOCALS~1\Temp\MSDE_CC_setup.l og
>for
>RETURN VALUE 3
>entries..
>about 10 lines before each entry some (sometime cryptic) description of the
>problem will be reported..
>
|||hi,
Smeusje wrote:
> I have two of them
> ************************************************** ************************************************** ********************
> MSI (s) (30!00) [13:58:12:796]: Product: Microsoft SQL Server Desktop
> Engine -- An error has occurred registering this installation of SQL
> Server Desktop Engine with MDAC.
> MSI (c) (60:90) [13:58:07:109]: Font created. Charset: Req=0, Ret=0,
> Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
> An error has occurred registering this installation of SQL Server
> Desktop Engine with MDAC.
> MSI (s) (30:D4) [13:58:12:812]: User policy value 'DisableRollback'
> is 0 MSI (s) (30:D4) [13:58:12:812]: Machine policy value
> 'DisableRollback' is 0 Action ended 13:58:12: InstallFinalize. Return
> value 3.
> ************************************************** ************************************************** *******************
>...
> MSI (s) (30:D4) [13:58:19:421]: Error in rollback skipped. Return:
> 5 Defer Properties returns: 0
> MSI (s) (30:D4) [13:58:19:437]: Unlocking Server
> MSI (s) (30:D4) [13:58:19:437]: PROPERTY CHANGE: Deleting
> UpdateStarted property. Its current value is '1'.
> Action ended 13:58:19: INSTALL. Return value 3.
> ************************************************** ************************************************** **********************
the first one indicates a problem "installing" MDAC... actually it should
not as it only has to check for the correct MDAC stack... on WinXP sp2 and
Win2003 MDAC 2.8 of the service pack 4 will not be installed becouse of the
"superior" level of the installed component, perfomed only via Windows
Update...
for the 2nd one I really have no clues...
I do think all this is dependent of a embedded installation of MSDE... can
you please try downloading and executing the original setup.exe boostrapper
installer of MSDE?
Andrea Montanari (Microsoft MVP - SQL Server)
http://www.asql.biz/DbaMgr.shtmhttp://italy.mvps.org
DbaMgr2k ver 0.18.0 - DbaMgr ver 0.62.0
(my vb6+sql-dmo little try to provide MS MSDE 1.0 and MSDE 2000 a visual
interface)
-- remove DMO to reply